Defender 710 - Bolt Work

  • Defender 710

    1/1Defender 710

  • Defender 710

Productoverzicht:

1- to 4-sided bolt work for safes CEN II-V.

The bolt work is prepared for the use of a glass plate. Due to two patented front shaft supports in form of integrated massive steel elements a very high manipulation protection is achieved. During the opening process the blocking is released by the forward motion of the shafts II and III. Afterwards shaft I is drawn back.

No defined locking order in case of 2-lock operation.

Productdetails

Bolt work

  • Dimensions base plate 224 x 420 mm
  • Installation applications
    • 2-lock operation
    • 3-sided (front shaft I, upper shaft II, lower shaft III)
    • Shaft I throw 25 mm, shaft II/III throw 34 mm, opening angle of handle 110°
    • Shaft connections: Ø 10.5 mm
    • Lock mounting: 4 M6 threaded bushes
    • Mounting position of locks: vertical, bolt up/down, bolt throw 8.7 - 12 mm, blocking of horizontal shafts
    • For right hand doors, opening clockwise
  • Manipulation protection
    • Support shaft I, release by forward motion of the shafts II/III
    • 2 integrated relockers, detent in blocking position
    • Prepared for use of a glass plate
    • Indirect blocking point
  • Steel chromated
  • Gear drive with follower 11 mm
  • Prepared for Ristow-Element 4.4
  • Weight approx. 7,770 g

We laten je graag meer zien