RCI 0563 1/2" Rim
The 0563 ½” rim strike is designed slim for tight-fitting installations with Pullman latch rim exit devices. The RCI 0563 has an optional adjustment to expand the strike to ¾” with a spacer. This modern strike utilizes micro-motor technology instead of traditional solenoid to reduce the power needed during operation. The RCI 0563 is field selectable for fail-safe or fail-secure, making it a flexible solution to fit multiple access control situations.
- Energy: 19mA Auto-Sensing 12-24VDC (Steady state current at 12VDC, 153mA peak)
- Strength: 1,500lbf Static 70ft-lb Dynamic
- Endurance: 100,000 Cycles
- Mode: Field-Selectable Fail-Safe & Fail-Secure
- Monitoring: Optional Latch Monitor Model Available
- Warranty: 5 Year Limited Warranty
Product details
- Surface-mounted – no frame cutting required
- Accommodates 1/2" to 3/4" (13mm–19mm) latch projection
- Includes two 1/8" (3.2mm) spacers to create two additional sizes, 5/8" (16mm) & 3/4" (19mm)
- Horizontal adjustment ensures proper latch positioning to compensate for door misalignment – up to 1/4" (6.4mm)
- Conventional keeper design (one moving part) – promotes even load distribution
- Lockdown holes for secure mount
- Low energy: draws less energy than traditional solenoid strikes
- Cost savings: operate 3X more strikes per power supply
- Cooler operation – runs cool to the touch; no suppressor kit needed
- High-grade stainless steel ensures superior strength and creates a sleek aesthetic
- Non-handed
- Plug-in wire connectors
- 19mA Auto-Sensing 12-24VDC (Steady state current at 12VDC, 153mA peak)
- 1,500lbf Static 70ft-lb Dynamic
- 100,000 Cycles
- Field-Selectable Fail-Safe & Fail-Secure
- Optional Latch Monitor Model Available
- 5 Year Limited Warranty
Dimensions: 1-3/4"W x 9"H x 1/2"D (45mm x 229mm x 13mm)
- Brushed Stainless Steel (32D) finish
- UL 1034 burglary-resistant Listed
- Patent #: Canadian 2,880,398
- Patent pending for US
Accessories
- 0162DDH - Double door housing, SPC finish (SPC=Silver Powder Coat)
- 0162MSK - 1/16" (1.5mm) mounting spacer
Note: Maximum voltage must not exceed 28V. Overheated or burnt PCBs caused by incorrect input voltage will not be covered under warranty. UL 1034 Burglary-resistant listing does not apply with use of 0563DDH.
- Commercial Centers
- Industrial Buildings
- Educational Facilities
- Retail Outlets
- Health Care Facilities
- Office Complexes