Mauer Mechanical

14 levers, standard footprint, dead bolt

Changeable lock with dead bolt for safes CEN III-V. Approx. 10 million theoretical variations. Standard footprint. The lock offers an unprecedented change to a new key set from the front side only by means of the user key and without...

11 levers, standard footprint, changeable, dead bolt

11 levers, standard footprint, dead bolt

11 levers, standard footprint, dead bolt

8 levers, standard footprint, changeable, dead bolt

8 levers, changeable, flat bolt, 2-way closure

8 levers, changeable, no change tool required, non key retaining, flat bolt

8 levers, changeable, dead bolt

8 levers, latch bolt, lock opening by handle

8 levers, standard footprint, dead bolt

8 levers, standard footprint, dead bolt

7 levers, dead bolt, 3-way closure (opt.), keyhole non concentric (opt.)

For profile cylinder, dead bolt, 3-way closure (opt.), double-bitted locking (opt.)

8 levers, triple bolt

8 levers, triple bolt

8 levers, changeable, dead bolt

8 levers, changeable, dead bolt

8 levers, flat bolt

8 levers, flat bolt

8 levers, flat bolt, 3-way closure

8 levers, flat bolt, 3-way closure

7 levers, dead bolt, 2-way closure (opt.)

9 levers, standard footprint, changeable, dead bolt, latch bolt (opt.)

9 levers, standard footprint, changeable, dead bolt, latch bolt (opt.)

11 levers, standard footprint, changeable, dead bolt

9 levers, aluminium fitting with LED display, standard footprint, changeable, dead bolt, latch bolt (opt.)

9 levers, aluminium fitting with LED display, standard footprint, changeable, dead bolt, latch bolt (opt.)

7 levers, latch bolt

5 bank/6 renter levers, 2 keyholes, dead bolt

4 bank/6 renter levers, 1 keyhole, dead bolt

5 bank/8 renter levers, 1 keyhole, changeable bank lock, dead bolt

7 levers, single-bitted keys, dead bolt

7 levers, double-bitted keys, dead bolt

3 combination knobs/6 levers, partly changeable lock, dead bolt, 3-way closure (opt.)

Electronically controlled safe deposit lock with dead bolt. Bank lock electronically controlled or 7,800 theoretical combinations, renter lock 280,000 theoretical variations. To open the lock the bank lock is first released electronically...

Double-bitted renter lock, 8 levers, dead bolt

Renter lock with turning knob, dead bolt

Renter lock with profile cylinder, 5 pins, dead bolt

4 renter combination knobs/6 decoding levers, coin function (opt.)

2-lock operation, 1-/2-/3-/4-sided, front shaft support, integrated relockers, prepared for glass plate, gear drive

2-lock operation, 1-/2-/3-sided, front shaft support, integrated relockers, manganese steel stripes, gear drive

2-lock operation, 2-/3-/4-sided, gear drive

1-lock operation, 2-/3-/4-sided, gear drive

2-lock operation, 2-/4-sided, gear drive

1-lock operation: lock with standard footprint or Code-Combi K, 2-lock operation: locks with standard footprints (opt.), 3-sided, gear drive

1-lock operation, 4-sided, gear drive

1-lock operation, 4-sided, gear drive

1-/2-lock operation, 4-sided, bolt protection, crimped base plate, eccentric drive

Adjustable, high-quality hinge with radial and axial spherical plain bearings. Installation application: plane. The hinge can be supplied optionally with a lead-through for cables.

High-quality hinge with maintenance-free bearing bushes. Installation applications Relino 106 K: projecting. The hinge can be supplied optionally with a lead-through for cables or an adjustable thrust bearing.

Height approx. 131 mm, self-lubricating bearing bushes, adjustable thrust bearing/lead-through for cables (opt.)

Height approx. 131 mm, self-lubricating bearing bushes, adjustable thrust bearing/lead-through for cables (opt.)

High-quality hinge with maintenance-free bearing bushes. Installation applications: plane or docked (opt.). The hinge Relino 131, in an identical design but with load-bearing capacity, is available for the installation applications "plane"...

Height approx. 71 mm, self-lubricating bearing bushes (opt.)

Polished aluminium EV1 anodised, profile mounted, projecting 137.5 mm

Drive 42 mm off-centre, for 3 wheel or 4 wheel (opt.) combination locks

In case a bolt work with two locks and a defined opening order is used, the key carrier set serves as actuator and manipulation protection of 70011 Primus C which is opened secondly. If the safe is locked, the key carrier set is fixed by means...

In case a bolt work with two locks and a defined opening order is used, the key carrier with foldable bow serves as actuator and manipulation protection for the second opened key lock. If the safe is locked, the key carrier set is fixed by means...

Die-cast chrome plated, length 145 mm, square spindle 8 mm (11 mm opt.), optional with chrome plated rosette

Standard Handle 135 mm Polished aluminium EV1 anodised Square spindle 8 mm, steel galvanised Two part screw-on rosette with anti-removal catch, external diameter 65 mm, polished aluminium EV1 anodised Weight approx. 350 g

Standard Handle 155 mm Polished aluminium EV1 anodised Square spindle 8 mm, projecting 114 mm, steel galvanised Square push-on rosette 90 mm, polished aluminium EV1 anodised, 2 slotted pins, integrated bearing bush Weight approx. 500 g

Standard Handle 205 mm Polished aluminium EV1 anodised Square spindle 11 mm, projecting 158.5 mm, steel blank Loose bearing bush, external diameter 25 mm, brass Weight approx. 610 g

Standard Handle 210 mm Polished aluminium EV1 anodised Square spindle 11 mm, projecting 160 mm, steel blank Loose bearing bush, external diameter 25 mm, brass Weight approx. 630 g

Standard Handle 150 mm Polished aluminium EV1 anodised Square spindle 8 mm, projecting 120 mm, steel galvanised Loose bearing bush, external diameter 20 mm, brass Weight approx. 350 g

Standard Handle 125 mm Polished aluminium EV1 anodised Square spindle 8 mm, projecting 120 mm, steel galvanised Loose bearing bush, external diameter 20 mm, brass Weight approx. 200 g

Standard Handle 143 mm Polished aluminium EV1 anodised Square spindle 8 mm, projecting 120 mm, steel galvanised Loose bearing bush, external diameter 20 mm, brass Weight approx. 340 g

Standard Handle 163 mm Polished aluminium EV1 anodised Square spindle 8 mm, projecting 120 mm, steel galvanised Loose bearing bush, external diameter 20 mm, brass Weight approx. 430 g

2-colour handle design in high quality plastic. Further fittings are available in this Univers series design: - Keyhole cover 93011 Stega Univers - Dial & ring combination 95041 Depravo Univers - Input units of the electronic combination...

Standard Handle Ø 100 mm Die-cast, coated, black Square spindle 8 mm, projecting 90 mm, steel galvanised Loose bearing bush, external diameter 20 mm, brass Weight approx. 300 g

Standard Hinged handle with bar Fitting Ø 97 mm Polished aluminium EV1 anodised Square spindle 8 mm, projecting 120 mm, steel tin coated Weight approx. 250 g

Standard Bar handle Fitting Ø 97 mm Polished aluminium EV1 anodised Square spindle 8 mm, projecting 120 mm, steel galvanised Weight approx. 200 g

Standard Hinged handle with finger recess Fitting Ø 97 mm Polished aluminium EV1 anodised Square spindle 8 mm, projecting 120 mm, steel galvanised Weight approx. 200 g

Standard Handle 156 mm, interior width 100 mm Polished aluminium EV1 anodised 2 cover stoppers, plastic Mounting from outside of the door Weight approx. 170 g

Standard Handle 125 mm Die-cast, chrome plated Square spindle 8 mm, projecting 120 mm, steel galvanised, square spindle und screw loose (not mounted) Weight approx. 350 g

Standard Ø 50 mm Polished aluminium EV1 anodised Keyhole non concentric Weight approx. 45 g

Standard Ø 63 mm Polished aluminium EV1 anodised Keyhole concentric Weight approx. 55 g

Standard Ø 50 mm Polished aluminium EV1 anodised Keyhole vertical, not concentric Short bit up Weight approx. 25 g

Standard Ø 63 mm Polished aluminium EV1 anodised Keyhole vertical, concentric Short bit up Weight approx. 30 g

2-colour escutcheon with rotatable key guide in high quality plastic. Further fittings are available in this Univers series design: - Handle 90045 Univers - Dial & ring combination 95041 Depravo Univers - Input units of the electronic safe...

The escutcheon with cover fits exclusively to the 86124 key carrier. Only when the key carrier is inserted, the cover can be shut. Standard Ø 80 mm Polished aluminium EV1 anodised Pivot of cover up Suitable for vertical locks (bolt...

External diameter 88 mm, polished aluminium EV1 anodised, top reading

External diameter 97 mm, polished aluminium EV1 anodised, front reading

Dimension 80 x 75mm, 2-colour plastic, top reading

Polished aluminium EV1 anodised, dimensions 270 x 75 x 14 mm, square spindle 8 mm

Polished aluminium EV1 anodised, dimensions 270 x 75 x 14 mm, square spindle 8 mm

Polished aluminium EV1 anodised, dimensions 270 x 75 x 14 mm, square spindle 8 mm