Produktsammanfattning
1- to 3-sided bolt work for safes CEN II-V.
The bolt work is protected by manganese steel plates. Tightening cords are used as additional protection. Due to two patented front shaft supports in form of integrated massive steel elements a very high manipulation protection is achieved. During the opening process the blocking is released by the forward motion of the shafts II and III. Afterwards the shaft I is drawn back.
No defined locking order in case of 2-lock operation.
Produktinformation
Bolt work
- Dimensions base plate 325 x 415 mm
- Installation applications
- 2-lock operation
- 3-sided (front shaft I, upper shaft II, lower shaft III)
- Shaft I throw 30 mm, shaft II/III throw 39 mm, opening angle of handle 125°
- Shaft connections: Ø 10.5 mm
- Mounting position of locks: horizontal, bolt left, bolt throw 8.7 - 12 mm, blocking of vertical shafts
- Lock mounting: 4 M6 threaded bushes
- For right hand doors, opening clockwise
- Manipulation protection
- High resistant shaft I, release by forward motion of the shafts II/III
- Base plate with riveted manganese steel plate, 2 mm thick
- Side manganese steel stripes
- Manganese steel angles as drilling protection
- Integrated relocker with tightening cord, polyester, 3 m length, detent in blocking position
- Indirect blocking points
- Electrolytic galvanised steel, cutting edge blank
- Gear drive with follower 11 mm
- Prepared for Ristow-Element 4.4
- Prepared for position indicator of shafts
- Weight approx. 9,300 g
Tekniska detaljer
Bolt work
- Defender 720 - standard - Order number: 83501
Options
- 1-sided (front shaft I) - Option code: SES
- 2-sided (front shaft I, upper shaft II) - Option code: SZS
- 1-lock operation, second lock blocking point without function - Option code: ESB
- For right hand doors, opening counter-clockwise - Option code: SRG
- For left hand doors, opening counter-clockwise - Option code: SLG
- For left hand doors, opening clockwise - Option code: SLI
Special types on request
Accessories
- Screw for blocking slide of the lock (2 screws per lock are needed) - Order number: 1 260 400 137
- Bolt distance plate for combination locks, throw 8.7 mm - Order number: 2 140 000 010
- Connection set Ristow-Element 4.4 for right hand doors - Order number: 3 118 000 080
- Connection set Ristow-Element 4.4 for left hand doors - Order number: 3 118 000 090
Hittar du inte det du letar efter?
Kontakta oss