K-SKPR Reader & Keypad

The Keyscan K-SKPR is a high frequency reader and keypad from dormakaba. As a smart card keypad reader it enforces both card presentation and PIN entry, a combination that gives a secured area more protection than a card or a PIN alone. The K-SKPR has built-in support for smartcard security and encryption and an electronic heartbeat that detects tamper or malfunction.

The K-SKPR is suited to new installations that need cost-effective high frequency readers and credentials. It also functions in existing Keyscan environments that use K-SMART and K-SMART3 readers. For sites where cards are not issued, users can be assigned a temporary or permanent PIN with designated access privileges.

The reader is designed to function with Keyscan K-SECURE 1K and 4K smartcards and with Keyscan K-SF-1K and K-TX2-1K RF transmitters. It also reads ISO 14443 credentials for the card serial number (CSN) only, and it provides a pass-through Wiegand output as standard.

  • Enforces both card presentation and PIN entry for secured areas
  • Temporary or permanent PINs with designated access privileges where cards are not issued
  • Mounts on a single gang electrical box
  • Membrane-style keypad surface prevents malfunction from dust and debris
  • Keypad surface does not leave finger print smudges

Product Details

  • Designed to function with Keyscan K-SECURE 1K and 4K smartcards, plus Keyscan K-SF-1K and K-TX2-1K RF transmitters
  • Also functions with ISO 14443 type credentials for CSN only
  • Suitable for indoor and outdoor use
  • Keypad labeled with alphanumeric identifiers
  • Pass-through Wiegand output standard
  • PIN entry outputs an 8-bit burst
  • Read range up to 6 in. (15.2 cm)
  • Epoxy-encased electronics for reliable operation
  • Mounts to a single-gang wall box
  • Buttons provide audible feedback
  • Blue backlighting for use in low-light areas
  • Raised pip on the 5 key for visually impaired users
  • Limited lifetime warranty against defects in materials and workmanship

Technical Details

  • Dimensions: 4 9/16 in. x 3 in. x 3/4 in. (11.6 cm x 7.6 cm x 2 cm)
  • Read range: mounted on non-metal up to 6 in. (15.2 cm); mounted on metal up to 4 in. (10.2 cm)
  • Input voltage: 12 VDC
  • Typical current draw: 160 mA
  • Operating temperature: -40 °F to 149 °F (-40 °C to 65 °C)
  • Cable, Wiegand interface: 500 ft (152 m); 6-conductor shielded 22 AWG
  • Housing: rugged, tamper-resistant epoxy potting designed to withstand harsh weather; indoor/outdoor design
  • Mounting: single-gang electrical box

Components

Designed to function with the following credentials 

  • Keyscan K-SECURE 1K smartcards 
  • Keyscan K-SECURE 4K smartcards 
  • Keyscan K-SF-1K 
  • Keyscan K-TX2-1K RF transmitters 
  • ISO 14443 type credentials (CSN only) 
K SKPR Readers Keyscan EAD

Can’t find what you’re looking for?

Contact us