dormakaba
dormakaba readers & credentials product line
Readers & Credentials: Contactless readers including proximity (125 kHz), smartcard (13.56 MHz), & long-range solutions

WSSKP-1

The WSSKP-1 keypad provides an alternative to card readers and may be connected to any Keyscan control unit or other manufacturer’s control unit that supports a Wiegand standard 26-bit format as an input signal. The WSSKP-1 can also be used conjointly with a proximity reader. Generally, this applies to a retro-fit where a keypad or reader already exists. The WSSKP-1 has standalone capabilities storing up to 28 PIN codes. The stored PIN codes can be used to activate an alarm panel for arming and disarming, locking and unlocking a door, or triggering a video surveillance system. The WSSKP-1 keypad can be used for both Wiegand signal and digital output. The WSSKP-1 is a rugged, water-resistant, stainless steel unit and may be installed indoors or outdoors.

  • Stand alone access control or part of a complete access control system
  • Suitable as replacement “reader” for any Keyscan 36 bit (or standard 26 bit) Wiegand reader
  • Brushed stainless steel keypad for durability that matches almost any décor
  • Braille keys for visually impaired requirements
  • Suitable for most exterior or interior applications
  • Simple to use commands allow maximum flexibility
  • Fast, easy, trouble-free installation
Downloads

Product details

  • WSSKP-1 supports industry standard 26 bit Wiegand data or proprietary Keyscan 36 bit format, it can be used with either a Keyscan ACU or with alternate control units supporting standard 26 bit data 
  • Three digit facility codes can easily be activated for installations using site or facility codes from 001 to 255 
  • Braille keypad permits use in premises that are accessible to visually impaired 
  • In stand alone applications, PIN’s can be set up to be either 3, 4 or 5 digits to suit the customer’s security requirements 
  • Any single PIN can be changed OR all PIN’s can be deleted with simple keypad command sequences for stand alone applications 
  • As many as 28 distinct PIN codes can be programmed into the WSSKP-1 for stand alone operation 

Dimensions: 3" x 4.5" x 0.5" (76mm x 114mm x 13mm) 

  • Power supply: External 
  • Input power (min): 12VDC ± 5% (30 mA) 
  • Output (max): 12VDC@500mA into non- inductive or diode suppressed inductive load 
  • Maximum power: 530 mA 
  • Mechanical tolerances: Key travel 0.050” (1.27mm) 
  • Key pressure: light touch, audio feed back, positive action keypad requiring only 4lbs (1.81kg) pressure 
  • Certifications: FCC Pt 15, sub J for a class B device, UL, CSA, CE 
  • Environmental tolerances: Suitable for light to moderate residential, commercial and industrial applications 
  • Relative humidity: 5% to 95% Non-Condensing 
  • Operating temperature: -35° to 65° C 
  • Button life expectancy: greater than 1,000,000 activations 

Product downloads