Kaba Mechanisch

14 levers, standard footprint, dead bolt

9 levers, standard footprint, changeable, dead bolt

11 levers, standard footprint, changeable, dead bolt

11 levers, standard footprint, dead bolt

11 levers, standard footprint, dead bolt

8 levers, standard footprint, changeable, dead bolt

8 levers, changeable, flat bolt, 2-way closure

8 levers, changeable, no change tool required, non key retaining, flat bolt

8 levers, changeable, dead bolt

8 levers, standard footprint, dead bolt

8 levers, standard footprint, dead bolt

7 levers, dead bolt, 3-way closure (opt.), keyhole non concentric (opt.)

For profile cylinder, dead bolt, 3-way closure (opt.), double-bitted locking (opt.)

8 levers, triple bolt

8 levers, triple bolt

8 levers, changeable, dead bolt

8 levers, changeable, dead bolt

8 levers, flat bolt

8 levers, flat bolt

8 levers, flat bolt, 3-way closure

8 levers, flat bolt, 3-way closure

7 levers, dead bolt, 2-way closure (opt.)

2-lock operation, 1-/2-/3-/4-sided, front shaft support, integrated relockers, prepared for glass plate, gear drive

2-lock operation, 1-/2-/3-sided, front shaft support, integrated relockers, manganese steel stripes, gear drive

2-lock operation, 2-/3-/4-sided, gear drive

1-lock operation, 2-/3-/4-sided, gear drive

2-lock operation, 2-/4-sided, gear drive

1-lock operation: lock with standard footprint or Code-Combi K, 2-lock operation: locks with standard footprints (opt.), 3-sided, gear drive

1-lock operation, 4-sided, gear drive

1-/2-lock operation, 4-sided, bolt protection, crimped base plate, eccentric drive

Height approx. 181 mm, with radial and axial spherical plain bearings, adjustable

Height approx. 106 mm, self-lubricating bearing bushes, adjustable thrust bearing/lead-through for cables (opt.)

Height approx. 131 mm, self-lubricating bearing bushes, adjustable thrust bearing/lead-through for cables (opt.)

Height approx. 131 mm, self-lubricating bearing bushes, adjustable thrust bearing/lead-through for cables (opt.)

Height approx. 131 mm, false hinge with lead-through for cables

Height approx. 71 mm, self-lubricating bearing bushes (opt.)

Drawn steel section blank, spot welded

Polished aluminium EV1 anodised, profile mounted, projecting 137.5 mm

Drive 42 mm off-centre, for 3 wheel or 4 wheel (opt.) combination locks

Key carrier set for detachable bit part, Polished aluminium EV1 anodised, external dimensions 88 mm

Key carrier set for detachable bit part, Steel