Produktsammendrag
The 4-sided bolt work is characterised by its smooth running gear wheel and its solid construction.
No defined locking order in case of 2-lock operation.
Produktdetaljer
Bolt work
- Dimensions base plate 300 x 102 mm
- Installation applications
- 2-lock operation
- 4-sided, shafts 72 mm wide, 2.5 mm thick
- Shaft throw 30 mm, opening angle of handle 90°
- Shaft connections: elongated hole 6.4 x 13.6 mm, Ø 6.4 mm
- Lock mounting: 4 x ¼" BSW threaded bushes
- Mounting position of locks: vertical, bolt down, bolt throw 8.7-12 mm, blocking of horizontal shafts
- For right hand doors, opening counter-clockwise
NB: "Opening counter-clockwise" is the standard opening direction for right hand doors with lever handles.
If the door is equipped with a hinged handle, we recommend "opening clockwise".
- Material/surface
- Base plate and cover plate steel lacquered
- Shafts steel blank
- Gear drive with follower 8 mm
- Weight approx. 2,500 g
Tekniske detaljer
Bolt work
- Defender 520S - standard - Order number: 84013
Options
- Installation applications
- 2-sided (front shaft I, hinge side shaft IV) SZS001
- 2-sided (upper shaft II, lower shaft III) SZS002
- Shaft throw 20 mm, opening angle of handle 60° HUB020
- Shaft throw 25 mm, opening angle of handle 75° HUB025
- Gear drive with follower 11 mm - Option code: ZRA011
- For right hand doors, opening clockwise - Option code: SRI
- For left hand doors, opening counter-clockwise - Option code: SLG
- For left hand doors, opening clockwise - Option code: SLI
- Manipulation protection
- Prepared for lock cover (fixing pins for glass or stainless steel plate) - Option code: VSD
- Manganese steel plate as drilling protection, 1.5 mm thick - Option code: MNB1.5
- Manganese steel plate as drilling protection, 3 mm thick (2 x 1.5 mm) - Option code: MNB003
- Surface
- Shafts galvanised blue - Option code: OZN
Special types on request
Finner du ikke det du leter etter?
Kontakt oss