Produktoversigt

Electronically controlled safe deposit locks with dead bolt.

The E-lo-safe series offers a range of locks with different control features within the same basic design.

In the version 79101 the bank authorisation is effected electronically by the cable interface of the central control. The customer authorisation is effected at the safe-deposit box by a double-bitted lock.

Produktdetaljer

Approvals/Certificates

  • Without any approvals/certificates

Lock  

  • Double-bitted renter lock
  • 8 levers, electrolytic galvanised steel
  • Opening with double-bitted key after electronic release
  • Renter key retained when in open position
  • Die-cast lock case and bolt, throw 12 mm
  • Control latch plastic, black
  • Weight approx. 450 g

Admissible mounting positions

  • Right hand lock, opening clockwise

Tekniske detaljer

Lock

  • E-lo-safe S - standard - Order number: 79101

Options

  • Tamper switch - Option code: AHK
  • Lock case and bolt surface treated - Option code: SRO
  • Connector - Option code: MTA156

Lock function

  • Passive release control:
    • After authorisation at the central control the current feed of the release solenoid starts immediately. After the lock has been opened (key turned) the current feed is interrupted.
  • Deposit box monitoring:
    • Using this concept only a limited monitoring of the deposit box is possible (e.g. box has been broken open).  

Key/latch contact (separate line), cable 5 wires, usable length 200 mm, cable ends tin-plated  

  • Interface: Input
  • Function element: Release solenoid
  • Specification: 360 Ohm, Umin=13 V DC
  • Operating time (OT): 13 V: 100% OT, 24 V: 48% OT
  • Option code: FSK005
     
  • Interface: Output
  • Function element: Key/latch contact
  • Specification: Change over contact, 50 mA, 30 V DC
  • Operating time (OT): 13 V: 100% OT, 24 V: 48% OT
  • Option code: FSK005

Alternative operating voltage (resistance solenoid)

  • Interface: Input
  • Function element: Release solenoid
  • Specification: 148 Ohm, Umin=5 V DC
  • Operating time (OT): 6 V: 100% OT, 12 V: 87% OT, 24 V: 15% OT
  • Option code: OHM148
     
  • Interface: Input
  • Function element: Release solenoid
  • Specification: 563 Ohm, Umin=20 V DC
  • Operating time (OT): 24 V: 87% OT
  • Option code: OHM563

Funktioner

Lock function

  • Active release control:
    • After authorization at the central control a supply voltage is applied at the lock. The current feed of the release solenoid starts after the lock has been opened (key turned). 
  • Deposit-box monitoring:
    • Using this concept it is possible to monitor the lock/deposit box (e.g. lock has been manipulated or box has been broken open).

Electronically controlled lock, cable 2 wires, usable length 211 mm, cable ends tin-plated

  • Interface: Input
  • Function element: Release solenoid
  • Specification: 360 Ohm, Umin=13 V DC
  • Operating time (OT): 13 V: 100% OT, 24 V: 48% OT
     
  • Interface: Output
  • Function element: Key/latch contact
  • Specification: Normally closed, 50 mA, 30 V DC
  • Operating time (OT): 13 V: 100% OT, 24 V: 48% OT

Lock function

  • Passive release control:
    • After authorisation at the central control the current feed of the release solenoid starts immediately. After the lock has been opened (key turned) the current feed is interrupted.
  • Deposit box monitoring:
    • Using this concept only a limited monitoring of the deposit box is possible (e.g. box has been broken open).

Key/latch contact (separate line), cable 5 wires, usable length 200 mm, cable ends tin-plated

  • Interface: Input
  • Function element: Release solenoid
  • Specification: 360 Ohm, Umin=13 V DC
  • Operating time (OT): 13 V: 100% OT, 24 V: 48% OT
     
  • Interface: Output
  • Function element: Key/latch contact
  • Specification: Change over contact, 50 mA, 30 V DC
  • Operating time (OT): 13 V: 100% OT, 24 V: 48% OT

E-lo-safe S - Keys with Mauer bow

Kan du ikke finde det, du leder efter?

Kontakt os