dormakaba
dormakaba switches product line
Switches - push buttons, illuminated buttons, mushroom buttons, & stainless steel push plates

9530 Balanced Magnetic Contact/Door Position Switch

The 9530 balanced magnetic contact/door position switch is a surface-mount switch and magnet set. The RCI 9530 is configured as a SPDT switch with magnetic tamper. The end-of-line resistors may be used to allow a predetermined trickle of current to flow and permit operation from a supervised line at all times.

  • Warranty: Lifetime Limited Warranty
Downloads

Product details

  • 50mA Max, 100VDC
  • Surface-mount switch and magnet
  • SPDT switch configuration with magnetic tamper
  • Lifetime Limited Warranty

9530 Balanced Magnetic Contact/Door Position Switch

Dimensions: 3-1/2"W x 1-1/4"H x 5/8"D (89mm x 32mm x 16mm)

  • Utilizes two Form C high reliability Rhodium plated reed switches, one of the two reed switches being of different sensitivity, encapsulated in epoxy inside a solid aluminum case
  • When the rare earth magnet is in place and properly adjusted (balanced), the magnetic tamper switch 2 will be in a state opposite to the switch 1
  • This normal configuration will change should one of the following occur; (1) switches 1 and 3 will change state by either the deliberate shunting of the magnetic field or if the door/window is opened, and (2) the addition of a magnetic field such as an external magnet will cause the magnetic tamper switch 2 to change state
  • End-of-line resistors may be used to allow a predetermined trickle of current to flow and permit operation from a supervised line at all times
  • 18" Armored Cable, #22 AWG Wire Leads

Product downloads