Half-height Sensor Barrier Argus HSB-E12

BIMをダりンロヌド
Half-height Sensor Barrier Argus HSB-E12-image-0
  • Passage width = 650 mm, total width = 1.070 mm, interlock height 945 mm, interlock length = 1.660 mm 
  • Guiding elements made of stainless steel AISI 304, Ø 60 mm, with 10 mm tempered safety glass panels and AISI 304 stainless steel bar handle. 
  • Integrated sensor system in respective handrail (L = 1660 mm / W = 130 mm / H = 45 mm). 
  • Two door leaves made of transparent polycarbonate, upper edge 900 mm. 
  • Drive housing made of stainless steel AISI 304. 
  • Stainless steel satin finish. 
  • Type 2 power assisted motion; 2 servo positioning drives / 2 directions electrically controlled, drives integrated in the rotating tube. 
  • Entrance sector monitored by a basic sensor system in compact overall length (fundamental single passage monitoring in both directions, security level 1). 
  • Protective device: rotation angle of the barrier door leaves monitored by the same sensor system. 
  • 2 operation modes are possible: 
    • Default position "day-operation" open: the door leaves close automatically if somebody tries to pass without authorisation. 
    • Default position "night-operation" closed: the door leaves open automatically for authorised persons in the passage direction and then close again after passage. 
  • In the case of a power failure: door leaves can be moved freely! 
  • Control units and power supply unit are integrated in the unit. 
  • Power supply 100-120 V / 200-240 V 50-60 Hz 
  • Dowelled on finished floor level FFL. 
  • Not suitable for outdoor installation!