Defender 720 - Bolt Work
Résumé du produit
1- to 3-sided bolt work for safes CEN II-V.
The bolt work is protected by manganese steel plates. Tightening cords are used as additional protection. Due to two patented front shaft supports in form of integrated massive steel elements a very high manipulation protection is achieved. During the opening process the blocking is released by the forward motion of the shafts II and III. Afterwards the shaft I is drawn back.
No defined locking order in case of 2-lock operation.
Détails du produit
Bolt work
- Dimensions base plate 325 x 415 mm
- Installation applications
- 2-lock operation
- 3-sided (front shaft I, upper shaft II, lower shaft III)
- Shaft I throw 30 mm, shaft II/III throw 39 mm, opening angle of handle 125°
- Shaft connections: Ø 10.5 mm
- Mounting position of locks: horizontal, bolt left, bolt throw 8.7 - 12 mm, blocking of vertical shafts
- Lock mounting: 4 M6 threaded bushes
- For right hand doors, opening clockwise
- Manipulation protection
- High resistant shaft I, release by forward motion of the shafts II/III
- Base plate with riveted manganese steel plate, 2 mm thick
- Side manganese steel stripes
- Manganese steel angles as drilling protection
- Integrated relocker with tightening cord, polyester, 3 m length, detent in blocking position
- Indirect blocking points
- Electrolytic galvanised steel, cutting edge blank
- Gear drive with follower 11 mm
- Prepared for Ristow-Element 4.4
- Prepared for position indicator of shafts
- Weight approx. 9,300 g
Nous sommes heureux de vous en montrer plus
dormakaba France
2-6 Place du Général de Gaulle
92160 Antony, France
Phone: 01 41 94 24 00
E-Mail: marketing.fr@dormakaba.com