Tuotteen yhteenveto

Electronically controlled safe deposit locks with dead bolt.

The E-lo-safe series offers a range of locks with different control features within the same basic design.

In the version 79106 the lock is operated by a turning knob. This version is mainly suitable for self-service stations where the complete release is authorised electronically.

tuotteen yksityiskohdat

Approvals/Certificates

  • Without any approvals/certificates

Lock  

  • Renter lock with turning knob for self-service stations
  • Opening with turning knob after electronic release
  • Die-cast lock case and bolt, throw 12 mm
  • Control latch plastic, black
  • Weight approx. 450 g

Admissible mounting positions

  • Right hand lock, opening clockwise

Tekniset yksityiskohdat

Lock

  • E-lo-safe D - standard - Order number: 79106

Options

  • Turning knob, for door thickness from 3-33 mm - Option code: DKA
  • Turning knob, for door thickness from 34-54 mm - Option code: DKC
  • Tamper switch - Option code: AHK
  • Lock case and bolt surface treated - Option code: SRO
  • Connector - Option code: MTA156

Lock function

  • Passive release control:
    • After authorisation at the central control the current feed of the release solenoid starts immediately. After the lock has been opened (key turned) the current feed is interrupted.
  • Deposit box monitoring:
    • Using this concept only a limited monitoring of the deposit box is possible (e.g. box has been broken open).  

Key/latch contact (separate line), cable 5 wires, usable length 200 mm, cable ends tin-plated  

  • Interface: Input
  • Function element: Release solenoid
  • Specification: 360 Ohm, Umin=13 V DC
  • Operating time (OT): 13 V: 100% OT, 24 V: 48% OT
  • Option code: FSK005
     
  • Interface: Output
  • Function element: Key/latch contact
  • Specification: Change over contact, 50 mA, 30 V DC
  • Operating time (OT): 13 V: 100% OT, 24 V: 48% OT
  • Option code: FSK005

Alternative operating voltage (resistance solenoid)

  • Interface: Input
  • Function element: Release solenoid
  • Specification: 148 Ohm, Umin=5 V DC
  • Operating time (OT): 6 V: 100% OT, 12 V: 87% OT, 24 V: 15% OT
  • Option code: OHM148
     
  • Interface: Input
  • Function element: Release solenoid
  • Specification: 563 Ohm, Umin=20 V DC
  • Operating time (OT): 24 V: 87% OT
  • Option code: OHM563

Toiminnot

Lock function

  • Active release control:
    • After authorization at the central control a supply voltage is applied at the lock. The current feed of the release solenoid starts after the lock has been opened (key turned). 
  • Deposit-box monitoring:
    • Using this concept it is possible to monitor the lock/deposit box (e.g. lock has been manipulated or box has been broken open).

Electronically controlled lock, cable 2 wires, usable length 211 mm, cable ends tin-plated

  • Interface: Input
  • Function element: Release solenoid
  • Specification: 360 Ohm, Umin=13 V DC
  • Operating time (OT): 13 V: 100% OT, 24 V: 48% OT
     
  • ​Interface: Output
  • Function element: Key/latch contact
  • Specification: Normally closed, 50 mA, 30 V DC
  • Operating time (OT): 13 V: 100% OT, 24 V: 48% OT

Lock function

  • Passive release control:
    • After authorisation at the central control the current feed of the release solenoid starts immediately. After the lock has been opened (key turned) the current feed is interrupted.
  • Deposit box monitoring:
    • Using this concept only a limited monitoring of the deposit box is possible (e.g. box has been broken open).

Key/latch contact (separate line), cable 5 wires, usable length 200 mm, cable ends tin-plated

  • Interface: Input
  • Function element: Release solenoid
  • Specification: 360 Ohm, Umin=13 V DC
  • Operating time (OT): 13 V: 100% OT, 24 V: 48% OT
     
  • Interface: Output
  • Function element: Key/latch contact
  • Specification: Change over contact, 50 mA, 30 V DC
  • Operating time (OT): 13 V: 100% OT, 24 V: 48% OT

E-lo-safe D

Etkö löydä etsimääsi?

Ota meihin yhteyttä