Tuotteen yhteenveto

1- to 3-sided bolt work for safes CEN II-V.

The bolt work is protected by manganese steel plates. Tightening cords are used as additional protection. Due to two patented front shaft supports in form of integrated massive steel elements a very high manipulation protection is achieved. During the opening process the blocking is released by the forward motion of the shafts II and III. Afterwards the shaft I is drawn back.

No defined locking order in case of 2-lock operation.

tuotteen yksityiskohdat

Bolt work

  • Dimensions base plate 325 x 415 mm
  • Installation applications
    • 2-lock operation
    • 3-sided (front shaft I, upper shaft II, lower shaft III)
    • Shaft I throw 30 mm, shaft II/III throw 39 mm, opening angle of handle 125°
    • Shaft connections: Ø 10.5 mm
    • Mounting position of locks: horizontal, bolt left, bolt throw 8.7 - 12 mm, blocking of vertical shafts
    • Lock mounting: 4 M6 threaded bushes
    • For right hand doors, opening clockwise
  • Manipulation protection
    • High resistant shaft I, release by forward motion of the shafts II/III
    • Base plate with riveted manganese steel plate, 2 mm thick
    • Side manganese steel stripes
    • Manganese steel angles as drilling protection
    • Integrated relocker with tightening cord, polyester, 3 m length, detent in blocking position
    • Indirect blocking points
  • Electrolytic galvanised steel, cutting edge blank
  • Gear drive with follower 11 mm
  • Prepared for Ristow-Element 4.4
  • Prepared for position indicator of shafts
  • Weight approx. 9,300 g

Tekniset yksityiskohdat

Bolt work

  • Defender 720 - standard - Order number: 83501

Options

  • 1-sided (front shaft I) - Option code: SES
  • 2-sided (front shaft I, upper shaft II) - Option code: SZS
  • 1-lock operation, second lock blocking point without function - Option code: ESB
  • For right hand doors, opening counter-clockwise - Option code: SRG
  • For left hand doors, opening counter-clockwise - Option code: SLG
  • For left hand doors, opening clockwise - Option code: SLI

Special types on request  

Accessories

  • Screw for blocking slide of the lock (2 screws per lock are needed) - Order number: 1 260 400 137
  • Bolt distance plate for combination locks, throw 8.7 mm - Order number: 2 140 000 010
  • Connection set Ristow-Element 4.4 for right hand doors - Order number: 3 118 000 080
  • Connection set Ristow-Element 4.4 for left hand doors - Order number: 3 118 000 090

Defender 720

Etkö löydä etsimääsi?

Ota meihin yhteyttä