Product Details
Bolt work
- Dimensions base plate 300 x 102 mm
- Installation applications
- 2-lock operation
- 4-sided, shafts 72 mm wide, 2.5 mm thick
- Shaft throw 30 mm, opening angle of handle 90°
- Shaft connections: elongated hole 6.4 x 13.6 mm, Ø 6.4 mm
- Lock mounting: 4 x ¼" BSW threaded bushes
- Mounting position of locks: vertical, bolt down, bolt throw 8.7-12 mm, blocking of horizontal shafts
- For right hand doors, opening counter-clockwise
NB: "Opening counter-clockwise" is the standard opening direction for right hand doors with lever handles.
If the door is equipped with a hinged handle, we recommend "opening clockwise".
- Material/surface
- Base plate and cover plate steel lacquered
- Shafts steel blank
- Gear drive with follower 8 mm
Technical Details
Bolt work
- Defender 520S - standard - Order number: 84013
Options
- Installation applications
- 2-sided (front shaft I, hinge side shaft IV)
- 2-sided (upper shaft II, lower shaft III)
- Shaft throw 20 mm, opening angle of handle 60°
- Shaft throw 25 mm, opening angle of handle 75°
- Gear drive with follower 11 mm
- For right hand doors, opening clockwise
- For left hand doors, opening counter-clockwise
- For left hand doors, opening clockwise
- Manipulation protection
- Prepared for lock cover (fixing pins for glass or stainless steel plate)
- Manganese steel plate as drilling protection, 1.5 mm thick
- Manganese steel plate as drilling protection, 3 mm thick (2 x 1.5 mm)
- Surface
- Shafts galvanised blue
Special types on request
We are happy to show you more
dormakaba Head Office
12 - 13 Dansu Court
3803 Hallam, Victoria, Australia
Phone: 1800 675 411
Email: info.au@dormakaba.com