Magnetic Door Lock cludo (Austrian Standard / DIN)

An attractive appearance is particularly important for architecturally high-quality living concepts and for blunt interior and intermediate doors.
The dormakaba magnetic latch lock cludo (lat. claudo = to close) meets these high demands.

Range of application:

for interior doors

ÖNORM versions:

Flat key (KB) with striking plate SB2, SB12, SB14 (only with black matt version - SWM) and SB30
WC and bathroom doors (WC) with striking plate SB2, SB12, SB14 (only with version black matt - SWM) and SB30
Profile cylinder (PZ) with strike plate SB2, SB12, SB14 (only with black matt - SWM) and SB30
Profile cylinder with change (WZ) with striking plate SB2, SB12 and SB30
Latch lock (FA) with striking plate SB6, SB14 (only with version black matt - SWM) and SB30

DIN versions:

Variegated (BB) with striking plate SB12 and SB22
WC and bathroom doors (WC) with striking plate SB12 and SB22
Profile cylinder (PZ) with striking plate SB12 and SB22
Latch lock (FA) with striking plate SB6

Flat key (KB), black matt (SWM), striking plate SB14

Product Details

Smooth, quiet door closing
Elegant appearance for premium residential concepts
Easy to clean as there are no protruding corners and edges
The striking plate plate is invisible when flush doors are closed
Supplied as a set (door lock and striking plate)
ÖNORM / DIN version
Plastic deadbolt: for ÖNORM version, backset 50 mm, incl. key brake for KB version Steel deadbolt: for all ÖNORM versions with backset 60 mm, WZ version and DIN versions
Plastic magnetic latch with integrated shock absorbers
Can be used right / left

Strike plates

SB6 ( 2-way adjustable)
SB2 ( 2-way adjustable)
SB22 ( 2-way adjustable)
SB12 ( 4-way adjustable)
SB14 (4-way adjustable, matt black - SWM)
SB30 (steel frame insert)

Technical Details

ÖNORM version

Round forend 250 x 18 x 3 mm in stainless steel or in black matt (SWM)
Hole center distance 88 mm for PZ / WZ, 90 mm for KB and WC
Backset 50 mm
Backset 60 mm (not available with forend finish black matt)
Lock case and cover made of ELO galvanized sheet steel
Plastic clamping nut
Square spindle 8.0 or 8.5 mm
Requirements and dimensions according to ÖNORM B5350, EN 12209:2006, utilization category 2

DIN version

Round forend 235 x 18(20) x 3 mm in stainless steel
Hole center distance 72 mm for PZ and BB, 78 mm for WC
Backset 55 mm
Lock case and cover made of ELO galvanized sheet steel
Plastic clamping nut
Square spindle 8.0 mm
Requirements according to EN 12209:2006, usage category 2

Funcționalități

The function principle is just as simple as it is effective:

When the door is open the lock latch is flush with the forend. Invisible cylindric magnets in the latch head hold the plastic latch back in the lock case.

When the door is closed a high performance block magnet pulls the latch into the striking plate and holds it there. This makes the closing process quiet and smooth. Wear is significantly reduced by using a plastic latch and by the automated closing process.