Defender 720
ürün özeti
Cıvatalar manganlı çelik plakalarla korunmaktadır. Ek koruma olarak sıkma kordonları kullanılır. Entegre masif çelik elemanlar şeklinde iki patentli ön şaft desteği sayesinde çok yüksek bir manipülasyon koruması elde edilir. Açma işlemi sırasında blokaj, şaftlar II ve III'ün ileri hareketiyle serbest bırakılır. Daha sonra şaft I geri çekilir.
2 kilitli çalışma durumunda tanımlanmış kilitleme sırası yoktur.
Ürün Detayları
Bolt work
- Dimensions base plate 325 x 415 mm
- Installation applications
- 2-lock operation
- 3-sided (front shaft I, upper shaft II, lower shaft III)
- Shaft I throw 30 mm, shaft II/III throw 39 mm, opening angle of handle 125°
- Shaft connections: Ø 10.5 mm
- Mounting position of locks: horizontal, bolt left, bolt throw 8.7 - 12 mm, blocking of vertical shafts
- Lock mounting: 4 M6 threaded bushes
- For right hand doors, opening clockwise
- Manipulation protection
- High resistant shaft I, release by forward motion of the shafts II/III
- Base plate with riveted manganese steel plate, 2 mm thick
- Side manganese steel stripes
- Manganese steel angles as drilling protection
- Integrated relocker with tightening cord, polyester, 3 m length, detent in blocking position
- Indirect blocking points
- Electrolytic galvanised steel, cutting edge blank
- Gear drive with follower 11 mm
- Prepared for Ristow-Element 4.4
- Prepared for position indicator of shafts
- Weight approx. 9,300 g