Defender Univers - Bolt Work

The 3-sided bolt work is characterised by its flexibility. It can be operated by maximal two locks with standard footprints or by one electronic lock combination 82021 Code-Combi K. In case of a 2-lock operation the locking order is not defined.

The bolt work can be supplied optionally with an integrated relocker and a lock driven blocking slide.

Product Details

Bolt work

Dimensions base plate 210 x 235 mm
Installation applications
- 1-lock operation:
  - 1 lock with standard footprint, admissible mounting position of lock: vertical, bolt down, bolt throw 8.7 - 12 mm
  - or 1 lock 82021 Code-Combi K, admissible mounting position of lock: horizontal, bolt right, bolt throw 12 mm
- 3-sided (front shaft I, upper shaft II, lower shaft III)
- Shaft throw 22 mm, opening angle of handle 75°
- Shaft connections: Ø 8.2 mm and elongated hole 6.4 x 13.6 mm, Ø 6.4 mm
- Lock mounting: 4 x ¼” BSW threaded bushes
- For right hand doors, opening clockwise
Steel blank
Gear drive with follower 8 mm

Technical Details

Boltwork

Defender Univers - standard - Order number: 84031

Options

Prepared for slide bolt technology
Prepared for 2-lock operation (locks with standard footprints),mounting position of locks: vertical, bolt down, bolt throw 8.7 - 12 mm
Steel chromated
Integrated relocker, detent in blocking position
Manganese steel plate as drilling protection 1.5 mm thick
Guide pins for tightening cord
- NB: This option is not suitable for lock 82021 Code-Combi K with “additional blocking slide” (3 118 000 070).
For right hand doors, opening counter-clockwise
For left hand doors, opening counter-clockwise
For left hand doors, opening clockwise
Lock mounting: 4 M6 threaded bushes

Special types on request

Accessories

Additional blocking slide with 4 plastic bushings (only for Code-Combi K 82021)
- NB: This option is only suitable for lock 82021 Code-Combi K with “blocking drive pin” (option SSD). - Order number: 3 118 000 070