Product Details
Bolt work
- Dimensions base plate 210 x 200 mm
- Installation applications
- 2-lock operation
- 4-sided, shafts 72 mm wide, 2.5 mm thick
- Shaft throw 30 mm, opening angle of handle 90°
- Shaft connections: elongated hole 6.4 x 13.6 mm, Ø 6.4 mm
- Lock mounting: 4 x ¼" BSW threaded bushes
- Mounting position of locks: vertical, bolt down, bolt throw 8.7-12 mm, blocking of horizontal shafts
- For right hand doors, opening counter-clockwise
NB: "Opening counter-clockwise" is the standard opening direction for right hand doors with lever handles.
If the door is equipped with a hinged handle, we recommend "opening clockwise".
- Material/surface
- Base plate and cover plate steel lacquered
- Shafts steel blank
- Gear drive with follower 8 mm
Technical Details
Bolt work
- Defender 520 - standard - Order number: 84011
Options
- Installation applications
- 3-sided (front shaft I, upper shaft II, lower shaft III)
- 2-sided (front shaft I, hinge side shaft IV)
- Shaft throw 20 mm, opening angle of handle 60°
- Shaft throw 25 mm, opening angle of handle 75°
- Lock mounting: 4 M6 threaded bushes
- Gear drive with follower 11 mm
- Anti-panic opening function, suitable for access doors (only 1 lock blocking position available)
- For right hand doors, opening clockwise
- For left hand doors, opening counter-clockwise
- For left hand doors, opening clockwise
- Manipulation protection
- Prepared for lock cover (fixing pins for glass or stainless steel plate)
- Manganese steel plate as drilling protection, 1.5 mm thick
- Manganese steel plate as drilling protection, 3 mm thick (2 x 1.5 mm)
- Guide pins for tightening cord
- Surface
- Shafts galvanised blue
Special types on request
Щастливи сме да ви покажем повече
дормакаба бизнес сървисис България
бул. Цариградско шосе 90
1784 Sofia, България
Не можете да намерите това, което търсите?
Свържете се с нас