dormakaba
Training Entrance Systems Control

ESC eLearning Training

We offer various eLearnings regarding Entrance Systems. The eLearnings are available in German and English

​If you have never done eLearning before, first you have to set up an account for the learning portal (See the instructions). When you have an account, you can use the direct links to the eLearning below.

If you are a partner, click here for guidelines.
If you are a dormakaba employee, click on the eLearning course title to directly access to the content.


General eLearning Courses

Target group: For everyone


eLearning CoursesLearning ObjectivesDuration

Introduction to Physical Access Systems (PAS)

Learn the basics about PAS (ESC), history, our segments and watch a gallery of our solutions. After completing the module you will be familiar with...

  • the ENS PAS (ESC) product area,
  • the Bühl site,
  • our products and business segments,
  • working with the extranet.
50 Minutes

Product overview half-height systems (PAS)

This lesson gives an overview of our half height systems like tripod barriers, swing doors, turnstiles, and sensor barriers.

30 Minutes

Product overview height systems (PAS)

This lesson gives an overview of our hight systems like security turnstiles, security revolving doors, and personal interlocks. 

25 Minutes

Product overview perimeter protections (PAS)

This lesson gives an overview of perimeter protection. It features high turnstiles and fullheight gates. 

20-25  Minutes

Product overview Personal Flow solutions (PAS)

This lesson gives an overview of personal flow solutions. It includes revolving doors and circular sliding doors.

10-15 Minutes

Product overview airport (PAS)

This lesson gives an overview of our airport products like one-way-corridors, self-boarding gates, and automated border control. 

30 Minutes

Introduction to service handling (PAS)
In this module, you will learn about our service organization and related service processes such as service requests, spare parts handling and other relevant facts. 
20 Minutes


ETS22 and Pavis eLearning Courses

Target group: Technicians, technical planners, and customer service


eLearning CoursesLearning ObjectivesDuration

Pavis: Installation of software (PAS)
In this lesson, you will learn how to install the Pavis3 software and all the requirements for the installation (install USB drivers for the ETS22cc, installation and release Pavis).10 Minutes

Pavis: Fundamentals (PAS)
In this lesson, you will learn the fundamentals of the Pavis software and the most important parameters.
  • Operate the Pavis software.
  • Download new firmware.
  • Adjust the key parameters.
  • Reset the maintenance counter.
  • Apply tips and tricks on how to use the Pavis software.
  • Create backups and restore these.
30-35 Minutes

ETS22: Introduction to control (PAS)In this lesson, you will learn what the ETS22cc is, in which products it is used and a lot of basic knowledge about this controller (install and connect an ETS22cc control).
30 Minutes

ETS22: Operating Panel and ETS21io board (PAS)
This module shows the Operating Panel (OPL) and the ETS21io board. We focus on technology. After completing the module, you will be able to ...
  • know the functions of the OPL-05 (Operating Panel),
  • know the functions of the ETS21io board,
  • have deepened your network knowledge,
  • set the boards’ DIP switches correctly.
15 Minutes

ETS22: CAN-Bus Knowledge (PAS)
This module contains a wide range of knowledge about the CAN-bus (planning and setting up a CAN network, setting the terminating resistors and addressing bus participants correctly).
25 Minutes

ETS22: Error analysis (PAS)
You will learn about the most common problems with the ETS22cc controller. After completing the module, you will be able to ...
  • know possible errors of the ETS22cc controller. 
  • identify errors in the unit’s behavior,
  • analyze errors with the Pavis software,
  • interpret flash codes and signals.
15 Minutes



Technology eLearning Courses

Target Group: Technicians, technical planners, and customer service


eLearning Courses
Learning Objectives
Duration

​Technology TPB
The tripod barrier in detail! Construction, assembly, various units, and maintenance work are treated here.
25 Minutes
Argus 40/60/80 Technology 1

Argus 40/60/80 Technology 1

The Argus 40/60/80 sensor barrier in detail! Construction, assembly, various units and maintenance work are treated here.

This is part 1/4.

15 Minutes