dormakaba ED 100 swing door operator with built-in RM-ED
For door widths up to 1100 mm

Name: dormakaba ED 100
Installation: Electromechanical swing door operator
Functions: fire protection / selectable as an option
Manufacturer: dormakaba

PRODUCT DESCRIPTION/FUNCTIONS
Low-energy (67N) or full-energy mode (150N)
Fire and smoke protection design including
fire protection upgrade card for
operation as a hold-open system in accordance with DIN EN14637 / DIBT (German Institute for Civil Engineering)
-Fire detector connection with fail-safe circuit
-Hold-open unit can be retracted by pulling on the door leaf
-Can be used without “Close door” button
-Reactivated by opening the door or
via program switch
Smoke detector with integrated power pack RM-ED built into the cover
for direct, invisible connection to the operator 
Operator dimensions HxDxW (mm): 70x130x735
Operator weight without cover (kg): 10.8
Operator weight including cover (kg): 12
Easy installation thanks to standard
invisible mounting plate with built-in cable channel
non-handed
pull-side and push-side designs available
Optional automatic operation with
active, self-learning wind load regulation
Adjustable push-and-go function
Optional door closing operation with
automatic or easy manual opening
via adjustable power assist function (from
0° position (servo) as per DIN 18040, DIN Spec 1104)
Max. opening force necessary for power assist (N): 23
Automatic driving phase adjustment with blocking recognition
Temperature management program with overload protection
Adjustable opening and closing time,
speed and force
Backcheck adjustable
Adjustable latching action
Hold-open time (s): 0 - 30 adjustable
Separate selectable hold-open time for night/bank pulse
Internal program switch with functions
OFF / AUTOMATIC / unlimited PERMANENT OPEN / EXIT ONLY
Status contact for connection
of building control system or warm-air curtains.
Locking feedback for
simple operation with e-openers and motor locks
with or without feedback contact
Adjustable unlocking time and force
Pulse receipt for 8 – 24 V DC/AC communication systems
Integrated cycle counter
Energy-saving mode with door closed
LED status indicator with service interval indicator
Internal control and update interface for programming
and parametrisation without tools

TECHNICAL FEATURES
Power consumption: max. (W): 120
Supply voltage 230 V AC +/-10%, 50 Hz
Power supply for external loads:
24 V DC +/-10 %, 1.5 A
Infinitely adjustable closing force EN 2-4 as per EN1154
Class of protection: IP 20
Operating noise dB(A): < 50
Opening and closing speed adjustable
Door opening angle max. (°): 110

APPROVAL AND CERTIFICATES
German type approval performed as per
DIN 18650 / EN 16005, class 3 (1M cycles)
DIBt (German Institute for Civil Engineering) approved for use on fire doors
General design certification: Z-6.500-2372
tested pursuant to DIN 18263-4
Environmental product declaration pursuant to DIN ISO 14025
Declaration number: EPD-DOR-20160041-IBD1-DE
DGNB navigator registration code: NL68E8
Opening force < 25N as per DIN 18040 / DIN SPEC 1104
Production in accordance with DIN ISO 9001

FIELDS OF APPLICATION
Door leaf width (mm): up to 1,100
Door leaf weight (kg): up to 160, depending on door width
- for single-leaf and double-leaf doors
- for interior and external doors
- for fire and smoke doors
- for emergency exit and escape route doors
- for barrier-free doors
- for LH and RH doors

DOOR TYPE
(a) single-leaf '..........'
(b) double-leaf, both door leaves automated with
mechanical door coordinator pursuant to EN 1158 '..........'
(c) double-leaf, active door leaf automatic (ED ESR 1/2) with
- passive door leaf with door closer function
- passive door leaf opened manually barrier free
- with power assist function as per DIN 18040
- unlimited hold-open function
- modular for potential upgrading to full automation
mechanical door coordinator pursuant to EN 1158 '..........'

FIXING POSITIONS
(a) Pull side with slide channel:
Lintel depth - 30 to + 30 mm '..........'
Lintel depth + 31 to + 60 mm '..........'
(b) Push side with slide channel:
Lintel depth - 30 to + 30 mm '..........'
(c) Push side with rod:
Lintel depth 0 to + 225 mm '..........'
Lintel depth 226 to + 300 mm '..........'
Axle extension (operator offset upward):
without axle extension '..........'
with 20 mm axle extension '..........'
with 30 mm axle extension '..........'
with 60 mm axle extension '..........'
Axle extension in operator colour '..........'

COVER
1-leaf Basic cover Standard (735 mm) '..........'
1-leaf cover Vario cover 900 to 1600 mm '..........'
2-leaf Vario cover, hinge size 1610-2200 mm '..........'

COLOUR
E6 C0 silver '..........'
white, similar to RAL 9016 '..........'
Special colour according to description '..........'

OPTIONS
Upgrade card professional '..........'
- extended hold-open time up to 180 s
- partial opening of 2-leaf doors
- flip-flop function
Upgrade card DCW '..........'
- operator upgraded to include DCW BUS connection
- controls communication and processes with DCW locks
- interface for interconnection via LON/LAN BUS and
Operation via the door management system TMS

ACCESSORIES

FIRE PROTECTION
Additional ceiling smoke detector RM-N '..........'
Manual release pushbutton (Close door) '..........'

SAFETY SENSORS
(a) Flatscan SW, '..........'
- laser technology
- for use at up to 4.0 m mounting height
- built-in secondary closing edge guard
(b) Sensor bar: Prosecure Opti Safe '..........'
- infrared technology
- for use at up to 3.5 m mounting height
Selection of standard installation underneath bar '..........'
Selection of installation on sliding channel '..........'
(Height only 42 mm )
Selection of installation next to sliding channel '..........'
(Height only 42 mm )
(c) Sensor bar IRS 4 '..........'
- infrared technology
- for use at up to 3.0 m mounting height
Weather protection hood suitable for sensor bar '..........'

MANUAL ACTIVATOR
Button system 55, colour: white
Protection class: IP 21 '..........'
Protection class: IP 44 (protected from spray water) '..........'
Stainless steel button system 55
Protection class: IP 21 '..........'
Protection class: IP 44 (protected from spray water) '..........'
Large area button with stainless steel button surface IP 21'..........'
Access control type: '..........'
Telecommunications system BRC, bidirectional 868.3 MHz
with BRC-R receiver built into the operator
BRC-H mobile hand-held radio transmitter '..........'
BRC-W radio wall button '..........'
BRC-T built-in radio transmitter / button interface '..........'
for installation in standard commercial buttons on the equipment

MANUAL ACTIVATOR WITH VISUAL FEEDBACK
LED sensor button, LED feedback: red - green
Water-tight, impact-resistant, protection class
(a) Plastic design
for screw-mounting without accessories '..........'
Mounting on flush-mounted box with holder '..........'
for surface mounting with holder '..........'
(b) Hardened-glass design
for adhesive-mounting without accessories '..........'
for screw-mounting with stainless steel frame V2A '..........'
(c) Stainless steel foot pedal, contact surface hardened glass
Screw-mounting directly on the finished floor '..........'
for floor installation via adjustable-height holder '..........'

RADAR MOTION SENSOR + RADAR BUTTON
Radar motion sensor
with direction recognition '..........'
direction recognition with cross-traffic suppression '..........'
Touchless wall button Radar technology '..........'

EXTERNAL PROGRAM SWITCH
(a) 4-position flush-mounted
not lockable '..........'
lockable '..........'
lockable with profile half cylinder '..........'
(b) 5-position, flush-mounted, BUS technology
electronic program switch EPS – DCW
lockable via coding system '..........'

DOOR LOCKING DEVICE
Electronic door opener, selection '..........'
Lock, type SVP 2xxx, type SVP '..........'
Lock, type SVP 2xxx, type SVP '..........'

CABLE LOOPS
Stainless steel cable loop with spiral cable sleeve
for invisible, crimp-free connections
KÜ 260 with spiral cable sleeve 155 mm '..........'
KÜ 480 with spiral cable sleeve 370 mm '..........'
Detachable cable loop plug connection LK 12 '..........'

INSTALLATION AND ADDITIONAL SERVICES
Professional and proper installation '..........'
Professional and proper commissioning '..........'
Maintenance contract '..........'